Model 113 English Instruction Sheet
Page 3
Symbols
J
Earth ground
T
Double Insulated
X
Hazardous voltage
Y
Hazardous voltage
N
Battery (Low battery
when shown on the
display.)
W
Important Information; Refer
to manual
CAT III
IEC Measurement
Category III – CAT III
equipment is designed to
protect against transients
in equipment in fixed
equipment installations,
such as distribution
panels, feeders and short
branch circuits, and
lighting systems in large
buildings.
CAT IV
IEC Measurement Category
IV – CAT IV equipment is
designed to protect against
transients from the primary
supply level, such as an
electricity meter, overhead or
underground utility service.
~
Do not dispose of this product as unsorted municipal waste. Go
to Fluke’s website for recycle information.
Terminals
COM
LOW IMPEDANCE
600 V
300 V
CAT
CAT
+
1
2
fda09.eps
No. Description
A
Common (return) terminal for all measurements.
B
Input terminal for all measurements.
To Next Page
Loading...
