Fluke 115 - Measuring Resistance; Testing for Continuity

114, 115, and 117
Users Manual
10
Measuring Resistance
edy04f.eps
XWWarning
To avoid electric shock, injury, or
damage to the Meter, disconnect
circuit power and discharge all high-
voltage capacitors before testing
resistance, continuity, diodes, or
capacitance.
Testing for Continuity
edy06f.eps
Note
The continuity function works best as a fast,
convenient method to check for opens and
shorts. For maximum accuracy in making
resistance measurements, use the Meter’s
resistance (e) function.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com