Technical Data
Fluke 117
Electrician’s Multimeter
with Non-Contact Voltage
Features include:
•
VoltAlert
™
technology for non-contact voltage detection
•
AutoVolt automatic ac/dc voltage selection
•
LoZ: helps prevent false readings due to ghost voltage
•
Large white LED backlight to work in poorly lit areas
•
True-rms for accurate measurements on non-linear loads
•
Measures 20 A (30 seconds momentary; 10 A continuous)
•
Resistance, continuity, frequency and capacitance
•
Min/Max/Average to record signal fluctuations
•
Compatible with optional magnetic hanger (ToolPak™) for
hands free operation
•
CAT III 600 V safety rated
Compact true-rms meter for
commercial applications
The Fluke 117 is the ideal meter for
demanding settings like commercial
buildings, hospitals and schools. The 117
includes integrated non-contact voltage
detection to help get the job done faster.
General specifications
Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at
0 % to 95 %.
The accuracy specifications take the form of:
± ( [ % of reading ] + [ counts ] )
Maximum voltage between any
terminal and earth ground
600 V
Surge protection 6 kV peak per IEC 61010-1 600 V
CAT III, Pollution Degree 2
Fuse for A input 11 A, 1000 V FAST Fuse
(Fluke PN 803293)
Display Digital: 6,000 counts, updates 4/sec
Bar graph 33 segments, updates 32/sec
Operating temperature -10 °C to + 50 °C
Storage temperature -40 °C to + 60 °C
Battery 9 volt Alkaline, NEDA 1604A/
IEC 6LR61
Battery life 400 hours typical, without backlight
To Next Page
Need help?
General
Weight and Dimensions
