Fluke 1620A DEWK - Accessories

15
4 Parts and Controls
Model 1620A-S includes a 1620A Thermo-Hygrometer readout, a standard accuracy
sensor (Model 2626-S), a thermo-hygrometer readout wall mount bracket, power supply
(Model 2361), and an RS-232 cable.
Accessories
The following accessories are available to compliment either the high accuracy or standard
thermo-hygrometer readout.
2626-S Spare Sensor/Standard Accuracy
2627-S Spare Sensor Kit includes a standard accuracy probe (2626-S), sensor case
(2607), sensor wall mount bracket (2630), and 25-foot (7.6 m) extension cable (2628)
2626-H Spare Sensor/High Accuracy
2627-H Spare sensor Kit includes a high accuracy sensor (2626-H), sensor case (2607),
sensor wall mount bracket (2630), and 25-foot (7.6 m) extension cable (2628)
2607 Spare Sensor Protective Case
2628 Extension cable, 7.6 m (25 ft)
2629 Extension cable, 15.2 m (50 ft)
2630 Sensor wall mount bracket
9328 Protective Case (includes space for a 1620A Thermo-Hygrometer, two sensors, RS-
232 cable, and power cord)
2361 Spare Power Supply, 100-240 V ac to 12 V dc
9936A LogWare III, single-PC license
9936A-L1 License, LogWare III, 1-pack
9936A-L5 License, LogWare III, 5-pack
9936A-L10 License, LogWare III, 10-pack
9936A-LST License, LogWare III, site
9936A-UPG Software, 9936A Upgrade from v1.X
2633-RF Option, Factory Installed Wireless, Dewk (Model 2633-USB or Model 2633-
232 receiver required to communicate with this option)
2633-USB Wireless Modem, USB to wireless (requires 2633-RF)
2633-232 Wireless Modem, RS-232 to wireless (requires 2633-RF)
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L