Need help?Do you have a question about the Fluke 199B and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Channels | 2 |
| Vertical Resolution | 8 bits |
| Input Coupling | AC, DC, GND |
| Sample Rate | 2.5 GS/s |
| Display | LCD |
| Input Impedance | 1 MΩ |
| Maximum Input Voltage | 400 V |
| Timebase Range | 2 ns/div |
| Battery Life | 4 hours |
| Safety Category | CAT III |
| Type | Digital Oscilloscope |
Read these pages carefully before installing and using the test tool. Ensure safe operation.
Follow generally accepted safety procedures and manual precautions for safe use.
Procedures when safety is likely impaired; refer to qualified technicians.
Warnings about exposing live parts when removing covers and using specified parts.
Tests for vertical accuracy, voltage, frequency, phase, time base, and trigger sensitivity.
Tests for DC voltage, AC voltage, continuity, diode, and resistance.
Performs a 30-minute warm-up and internal adjustment steps.
Details calibration of input gains, DMM volts/ohms, and zero adjustments.
Step-by-step guides for removing and reinstalling various components.
To Next Page
