Fluke 177 Series User Manual

4
Note
The external antenna is not sold by Fluke. The
antenna cable connects to the antenna with a SMA
connector that has an outside thread and a center
receptacle (SMA female/jack). Former FCC
regulations required that WiFi equipment must use
reverse polarity connectors. You must use an SMA
male plug to RP-SMA female adapter if the antenna
uses a RP-SMA male connector with an internal
thread and center receptacle.
177x Antenna
Specifications
Size ................................................72.3 mm x 45.6 mm x 28.5 mm
Weight ..........................................35 g
Storage Temperature .............-20 °C to 60 °C
Note
Complete specifications are at www.fluke.com
. See
the 1773/1775/1777 Product Specifications.
Safety ...........................................IEC 61010-1: Pollution
Degree 2
Electromagnetic Compatibility (EMC)
International ..........................IEC 61326-1: Basic
Electromagnetic Environment,
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated
and/or uses conductively-coupled radio frequency
energy that is necessary for the internal function of
the equipment itself.
2
1

Fluke 177 Series Specifications

General

True RMS	Yes
Display	6000 counts
Safety Rating	CAT IV 600 V, CAT III 1000 V
Battery Type	AA
Resistance Range	600.0 Ω to 50.00 MΩ
Operating Temperature	0°C to 50°C