Fluke 187 - Function Specific Setup Selections

Model 187 & 189
Users Manual
5-2
Table 5-1. Function Specific Setup Selections
Selection Precondition Option Choices (
< > ) Factory Default
000.0 °C
or
000.0 °F
Temperature (
w )
selected.
Temperature
offset adjust
000.0 ° to ±100.0 °C(180.0°F) - Use q to
increment or decrement digit.
Use
< > to select digit. Selected digit
flashes.
000.0 °C (or °F)
L Int Model 189 only. Log interval MM:SS - Use q to increment or
decrement minute or second values.
Use
< > to select minute or seconds.
Selected values flash.
15:00
dbrEF AC volts (\ or
,) selected.
dB type dBm or dBV (m or V flashing) - Use
< >
to select.
dBV
dbrEF AC volts (\ or
,) and dBm
selected.
dBm reference 0001 Ω to 1999 Ω - Use
q to increment
or decrement digit.
Use
< > to select digit.
0600 Ω