Fluke 18B+ - Measure AC and DC Voltage

Digital Multimeters
Measurements
9
Measure AC and DC Voltage
To measure ac and dc voltage:
1. Turn the rotary switch to , , or  to choose ac or
dc.
2. Push  to toggle between mVac or mVdc voltage
measurement.
3. Connect the red test lead to the terminal and the
black test lead to the COM terminal.
4. Touch the probes to the correct test points of the circuit
to measure the voltage, as shown in Figure 1.
5. Read the measured voltage on the display.
V ac V dc mV ac/dc
hpq03.eps
Figure 1. Measure AC and DC Voltage