Fluke 2052R - Receiver Battery Replacement; Transmitter Battery Replacement

2052R/2062R/2000T
Users Manual
42
Receiver Battery Replacement
Use alkaline or rechargeable NiMH batteries. Batteries do not come installed in the Receiver.
To charge NiMH batteries, remove from the batteries from the Receiver.
To install or replace the batteries in the Receiver, turn off the Receiver and install new batteries
with the correct polarity. See Figure 25.
Figure 25. Receiver Battery Replacement
Transmitter Battery Replacement
Alkaline batteries ship with the Product. If desired, use NiMH rechargeable batteries in the
Transmitter. Batteries do not come installed in the Transmitter. To charge NiMH batteries,
remove the batteries from the Transmitter.
To install or replace the batteries in the Transmitter, turn off and disconnect the Transmitter
from the circuit and install new batteries with the correct polarity. See Figure 26. With new
batteries installed, set the battery type. See Battery Type Selection (2000T, 2052R).
4 AA
2062
R
4 AA
2052
R
4 AA
2062
R