1
Introduction
The Fluke 2052R and 2062R (the Receiver or the Product) are wire tracer receivers. The Fluke
2000T (the Transmitter or the Product) is a wire tracer transmitter. Use the Receiver to detect
an electromagnetic signal in wires or cables.
Use the Receiver with the Transmitter in any mode except for non-contact voltage (NCV) mode
to detect a specific wire. Use the Receiver in NCV mode without the Transmitter to trace wires
based on the presence of AC voltage. See Use the Receiver. The application figures show the
2062R receiver, but the applications apply to both models unless otherwise noted.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.fluke.com
.
To register your product, or to view, print, or download the latest manual or manual
supplement, go to our website: www.fluke.com/productinfo
.
+1-425-446-5500 fluke-info@fluke.com
Safety Information
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
General Safety Information is in the printed Safety Information document that shipped with the
Product. To view the Safety document online, go to our website. See specific safety
information in this document where applicable.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
To Next Page
Loading...