Fluke 27 - General Maintenance

Operator Maintenance
19
Table 4. Replacement Fuses
Item Description PN Qty
F1
W
Fuse, F44/100A,
1000 VAC/DC
943121 1
F2
W
Fuse, F11A, 1000
VAC/DC
803293 1
W To ensure safety, use exact replacement only
General Maintenance
Clean the case with a damp cloth and detergent; do not
use abrasives or solvents.
The Fluke 27 is sealed to protect the instrument. To
maintain proper sealing, open only the battery/fuse
compartment.
Have the meter calibrated and the seals (part number
738112) replaced by a qualified technician once a year to
ensure specified performance. Contact the nearest Fluke
Service Center or refer to the Fluke 27 Service Manual
(part number 690206) for calibration or repair. Refer to
Table 5 for replaceable parts.
Table 5. Replaceable Parts
Item Description PN Qty
BT1 Battery, 9V 696534 1
H6 Screw, PH 6-32 x 3/8 682070 4
MP11 Foot, Case 654335 1
MP12 Bail, Tilt (Bracket) 744474 1
MP14 Cover, Battery 670585 1
MP15 O-Ring, Battery 697185 1
MP16 Spacer, Battery 665023 1
MP61 Fuse Cover 665031
TL75* Test Lead Set 1
AC70* Allicator Clip Set 1
TM1 Users Manual 690203 1
TM2 Service Manual 690206 1
*Accessory Number