2700G Series
Users Manual
10
How to Change the Batteries
XWWarning
To prevent possible electrical shock, fire, or
personal injury, have an approved technician
repair the Product.
To change the batteries, see Figure 2:
1. Pull off the Product cover.
2. Use a Phillips screwdriver to loosen the captive
screw on the battery door.
3. Remove the battery door.
4. Replace the three AA batteries.
5. Install the battery door again.
6. Tighten the captive screw on the battery door.
7. Return the Product to its Holster.
gsn002.eps
Figure 2. Change the Batteries
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
