Fluke 302+ - Page 8

302+/303
Users Manual
4
• The battery door must be closed and locked before you operate the
Product.
• Measure a known voltage first to make sure that the Product operates
correctly.
• Remove all probes, test leads, and accessories that are not necessary
for the measurement.
• Use only current probes, test leads, and adapters supplied with the
Product.
• Keep fingers behind the finger guards on the probes.
• Connect the common test lead before the live test lead and remove the
live test lead before the common test lead.
• Remove all probes, test leads, and accessories before the battery door is
opened.