Fluke 312 - Symbol Definition; Making Measurements

Users Manual
7
Symbol Definition
1 14 13 12 11
10
9
2
3
4
5
8
7
6
aca02f.eps
A
MAX Maximum reading displayed (316, 318 only)
MIN Minimum reading displayed (316, 318 only)
H
AC mode
B
Relative ( S ) mode is active
I
V Volts
A Amps
C
Negative reading
J
e Ohms
D
Battery is low and should be changed
K
Hold function is selected
E
Bar graph
L
Diode/continuity test
function is selected
F
Manual range mode
M
Peak - function is selected
G
DC mode
N
Peak + function is
selected
Figure 2. LCD Explanation
Making Measurements
XWarning
• When measuring current, center the conductor in the
clamp using the alignment marks on the clamp.
• To avoid electrical shock when making current
measurements, disconnect the test leads from the
Meter.
• The bargraph is for reference only; it does not show
the actual measured value or range. Use the main
display to read the actual measured value and range.