Fluke 312 - Measuring Resistance

312, 316, 318
12
Measuring Resistance
XWarning
To avoid electrical shock when measuring resistance in a
circuit, make sure the power to the circuit is turned off and
all capacitors are discharged.
1. Turn the rotary function switch to e. Remove power from the
circuit being tested.
2. Connect the black test lead to the COM terminal and the red
test lead to the Ve terminal.
3. Measure the resistance by touching the probes to the desired
test points of the circuit.
4. View the reading on the LCD.
TRUE RMS
CLAMP METER
318
AC/DC MIN MAXREL
OFF
40
A
400
A
1000
A
V
PEAK HOLD
OFF
PEAK HOLD
aca16f.eps
Figure 6. Measuring Resistance (318 shown)