Clamp Meter
Safety Information
3
Warning
To prevent possible electrical shock, fire, or personal injury:
• Use the Product only as specified, or the protection supplied by the
Product can be compromised.
• Use only correct measurement category (CAT), voltage, and amperage
rated probes, test leads, and adapters for the measurement.
• Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.
• Carefully read all instructions.
• Hold the Product behind the tactile barrier. See Clamp Meter, item .
• Do not exceed the Measurement Category (CAT) rating of the lowest
rated individual component of a Product, probe, or accessory.
• Do not measure current while the test leads are in the input jacks.
• Do not use the Product around explosive gas, vapor, or in damp or wet
environments.
• Limit operation to the specified measurement category, voltage, or
amperage ratings.
• Do not work alone.
To Next Page
Loading...
