365
Calibration Manual
4
Table 1. Symbols
Symbol Meaning Symbol Meaning
B AC (Alternating Current)
J
Earth ground
F DC (Direct Current)
AC and dc current.
X Hazardous voltage W
Risk of Danger. Important
information. See Manual.
Battery. Low battery when shown. The Meter
shuts down when the battery reaches 2.0 V.
T
Double insulated
~
Do not dispose of this product as unsorted
municipal waste. Go to Fluke’s website for
recycling information.
)
Conforms to relevant North
American Safety Standards.
CAT III
IEC Measurement Category III
CAT III equipment has protection against
transients in equipment in fixed-equipment
installations, such as distribution panels,
feeders and short branch circuits, and lighting
systems in large buildings.
,
Application around and removal
from HAZARDOUS LIVE
conductors is permitted.
P Conforms to European Union directives. ®
Examined and licensed by TÜV
Product Services.
;
Conforms to relevant Australian standards.
Note
The Measurement Category (CAT) and voltage rating of any combination
of test probe, test probe accessory, current clamp accessory, and the Meter
is the LOWEST rating of any individual component.