5520A
Getting Started
6
5520A Getting Started Manual
This 5520A Getting Started Manual contains a brief introduction to the 5520A Manual
Set, instructions on how to get your calibrator prepared for operation and a complete set
of specifications.
5520A Operators Manual
The 5520A Operators Manual provides complete information for installing the 5520A
Calibrator and operating it from the front panel keys and in remote configurations. This
manual also provides a glossary of calibration, specifications, and error code information.
The Operators Manual includes the following topics:
• Installation
• Operating controls and features, including front panel operation
• Remote operation (IEEE-488 bus or serial port remote control)
• Serial port operation (printing, displaying, or transferring data, and setting up for
serial port remote control)
• Operator maintenance, including verification procedures and calibration approach for
the 5520A
• Oscilloscope calibration options
• Accessories
5520A Operators Guide
The 5520A Operators Guide contains a summary of operating instructions, and a front
panel and rear panel feature reference. It is available in seven languages.
5520A Programmers Guide
The 5520A Programmers Guide contains a summary of remote commands and reference
information useful in determining system status using the status byte and related
registers.
5520A Service Manual
The 5520A Service Manual includes: theory of operation, performance testing,
maintenance, and calibration information.
To Next Page
Loading...
