Need help?Do you have a question about the Fluke 5522A and is the answer not in the manual?
General| Voltage DC range | 0 to ±1020 V |
|---|---|
| Function | Multifunction Calibrator |
| Current DC range | 0 to ±20.5 A |
| Current AC range | 20.5 A |
| Resistance range | 0 to 1100 MΩ |
| Frequency range | 10 Hz to 2 MHz |
| Accuracy | Varies by function and range |
| Output Stability | Varies by function and range |
| Interface | RS-232, IEEE-488 |
| Power Supply | 50 Hz to 60 Hz |
| Dimensions | 17.5 in x 7 in |
Details critical safety precautions and warnings for operating the calibrator.
Provides specific performance data for various output functions and ranges.
Step-by-step guide for replacing the main power fuse.
Instructions for safely connecting the calibrator to a grounded power outlet.
Details the controls, displays, indicators, and terminals on the front panel.
Step-by-step guide to powering on the calibrator safely.
Procedure to return the calibrator to its power-up state.
Steps to recalibrate internal circuitry for optimal accuracy.
Instructions and diagrams for connecting the calibrator to a Unit Under Test.
General procedure for setting output values and units using front panel keys.
Step-by-step guide to setting a specific DC voltage output.
Procedure for setting AC voltage or dBm output.
Steps to set a synthesized resistance output.
Procedure for simulating thermocouple temperature outputs.
Guide to configuring the IEEE-488 interface for remote operation.
Procedure for setting up the RS-232 host port for PC communication.
Steps to configure the RS-232 UUT port for pass-through communication.
Explains how to construct and use commands for remote control.
Lists all Calibrator commands with protocol details, parameters, and examples.
Step-by-step instructions for replacing the line fuse.
Provides tables and points for verifying the calibrator's specifications.
Details specifications for DC and square wave voltage outputs.
Guides the user on how to select and start the SC600 Option.
To Next Page
