Fluke 5522A - How to Test the RS-232 UUT Port Via RS-232 Host Port

5522A
Operators Manual
5-16
nn125f.eps
How to Test the RS-232 UUT Port via RS-232 Host Port
Choose or adapt one of the following test procedures to test the Calibrator RS-232 UUT
port via the RS-232 Host port. Connect the UUT and PC as shown in Figure 5-5. Note the
use of a modem cable (NOT null modem) for UUT connection. (See Appendix C for
information about RS-232 cables and connectors.)