Fluke 5522A - Introduction

8-3
Introduction
Table 8-1 summarizes the available models, options, and accessories, including cables
and components.
Table 8-1. Options and Accessories
Model Description
5520A-SC1100 Oscilloscope Calibration Option
5500A-SC600 Oscilloscope Calibration Option
55XX/CASE Transit Case
5522A/CARRYCASE Carry Case with removable front/back panels
5500A/HNDL Side Handle
5520A-525A/LEADS Comprehensive Lead Set
700-Pxx
Fluke 700 series of pressure modules. Requires Fluke 700-PCK for operation
with the 5522A Calibrator
700-PCK Pressure module calibration kit
109215 Replacement fuse; 5 A/250 V Time Delay (100 V or 120 V line voltage)
851931 Replacement fuse; 2.5 A/250 V Time Delay (200 V or 240 V line voltage)
3674001 Replacement fuse; 4 A/500 V, Ultra fast, 0.25 x 1.25, ceramic body
3470596 Replacement fuse; 25 A/250 V, Fast, 6.3 X 32 mm
664828 MET/CAL-IEEE NT, Option, IEEE Interface
666339 MET/CAL-IEEE PCI, Option, IEEE Interface (PCI)
943738 RS-232 Modem Cable, 2.44 m (8 ft) (SERIAL 2 TO UUT) to UUT (DB-9)
MET/CAL-L Version 7 Automated Calibration Software. Single user floating license. Requires
MET/BASE-7 for operation.
5500/CAL-L Version 7 Automated Calibration Software. Single user floating license. RS-232
control only. Requires MET/BASE-7 for operation.
MET/TRACK-L Version 7 T&M Asset management Software. Single user floating license.
Requires MET/BASE-7 for operation.
MET/BASE-7 Fluke Metrology Software. Requires licenses for one or more client applications
(MET/CAL-I, 5500/CAL-I and/or MET/TRACK-I).
MET/CAL-IEEE NT IEEE Interface Option.
MET/CAL-IEEE PCI IEEE Interface Option.
MET/CAL-IEEE PCMIA IEEE Interface Option.
MET/CAL-IEEE USB IEEE Interface Option.
PM8914/001 RS-232 Null Modem Cable, 1.5 m (5 ft) (SERIAL 1 FROM HOST) to PC COM
(DB-9)
RS40 RS-232 Null Modem Cable, 1.83 m (6 ft) (SERIAL 1 FROM HOST) to
PC COM (DB-25)