EasyManua.ls Logo

Fluke 5522A - AC Voltage Specifications

Fluke 5522A
426 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5522A
Operators Manual
11-4
Note
All harmonic specifications below include the fundamental. For waveforms
with no harmonics other than the fundamental, the RMS uncertainty is the
same as the non-PQ mode of the 5520A.
AC Voltage Specifications
Composite
Waveform
Ranges
Harmonic
Frequency
Harmonic
Amplitude
Range (% of
Fundamental)
[1]
Harmonic Amplitude
Uncertainty
(% of Fundamental + V)
Harmonic
Phase
Uncertainty
(Relative to
Fundamental)
[2]
Absolute RMS
Uncertainty of
Composite Waveform
(% RMS + V)
15 to 45 Hz 0.1 to 100 %
0.1 % + 10 μV 0.5 °
45 to 900 Hz 0.1 to 100 %
0.1 % + 10 μV 0.5 °
900 Hz to 2 kHz 0.1 to 100 %
0.1 % + 10 μV 1 °
1 to
32.999 mV
2 to 5 kHz 0.1 to 100 %
0.1 % + 30 μV 3 °
0.20 % + 6 μV
15 to 45 Hz 0.1 to 100 %
0.1 % + 60 μV 0.5 °
45 to 900 Hz 0.1 to 100 %
0.1 % + 60 μV 0.5 °
900 Hz to 2 kHz 0.1 to 100 %
0.1 % + 60 μV 0.8 °
33 to
329.99 mV
2 to 5 kHz 0.1 to 100 %
0.1 % + 60 μV 2 °
0.20 % + 10 μV
15 to 45 Hz 0.1 to 100 %
0.1 % + 400 μV 0.5 °
45 to 900 Hz 0.1 to 100 %
0.1 % + 400 μV 0.3 °
900 Hz to 2 kHz 0.1 to 100 %
0.1 % + 400 μV 0.5 °
0.33 to
3.2999 V
2 to 5 kHz 0.1 to 100 %
0.1 % + 400 μV 2 °
0.20 % + 100 μV
15 to 45 Hz 0.1 to 100 % 0.1 % + 4 mV
0.5 °
45 to 900 Hz 0.1 to 100 % 0.1 % + 4 mV
0.3 °
900 Hz to 2 kHz 0.1 to 100 % 0.1 % + 4 mV
0.5 °
3.3 to
32.999 V
2 to 5 kHz 0.1 to 100 % 0.1 % + 4 mV
2 °
0.20 % + 1 mV
45 to 440 Hz 0.1 to 100 % 0.2 % + 20 mV
0.75 °
440 to 660 Hz 0.1 to 30 % 0.25 % + 20 mV
1.2 °
660 to 1.2 kHz 0.1 to 10 %
0.35 % + 25 mV
[3]
3 °
33 to
329.99 V
1.2 to 2 kHz 0.1 to 5 %
0.5 % + 40 mV
[4]
5 °
0.20 % + 10 mV
45 to 440 Hz 0.1 to 100 % 0.25 % + 100 mV
0.75 °
440 to 660 Hz 0.1 to 30 % 0.25 % + 100 mV
1.2 °
660 to 1.2 kHz 0.1 to 10 %
0.4 % + 100 mV
[5]
3 °
330 to
1020 V
1.2 to 2 kHz 0.1 to 5 %
0.6 % + 160 mV
[6]
5 °
0.20 % + 100 mV
[1] All frequencies can have harmonics that are up to 100 % of the fundamental, but uncertainties are not specified unless otherwise
indicated.
[2] For harmonics that are < 1 % of the Fundamental, phase uncertainty is typical.
[3] When harmonics of this frequency band are combined with harmonics 45 to 660 Hz, all 45 to 660 Hz harmonics have an uncertainty
of 0.35 % + 25 mV.
[4] When harmonics of this frequency band are combined with harmonics 45 Hz to 1.2 kHz, all 45 Hz to 1.2 kHz harmonics have an
uncertainty of 0.4 % + 25 mV.
[5] When harmonics of this frequency band are combined with harmonics 45 to 660 Hz, all 45 to 660 Hz harmonics have an uncertainty
of 0.4 % + 100 mV.
[6] When harmonics of this frequency band are combined with harmonics 45 Hz to 1.2 kHz, all 45 Hz to 1.2 kHz harmonics have an
uncertainty of 0.5 % + 100 mV.

Table of Contents

Related product manuals