Need help?Do you have a question about the Fluke 5700A Series and is the answer not in the manual?
General| Type | Multifunction Calibrator |
|---|---|
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Frequency Range | 10 Hz to 1 MHz |
| Accuracy | Varies by function and range. See manufacturer's specifications for details. |
| Output Stability | Varies by function and range. See manufacturer's specifications for details. |
| Power Requirements | 50 Hz to 60 Hz |
Provides an overview of the calibrator's capabilities and features.
Details electrical and performance specifications for the calibrator, including confidence levels.
Describes the calibrator's internal architecture, microprocessor control, and diagnostic capabilities.
Explains the operation of each output function, detailing assembly interactions.
Outlines procedures for calibrating the instrument to external standards and performing checks.
Details the connection and process for calibrating using external standards like voltage and resistance.
Instructions for cleaning the calibrator's air filter to prevent overheating and maintain performance.
Outlines safety precautions and methods for accessing internal components for servicing.
Introduces troubleshooting guidance for isolating faulty modules using diagnostic fault codes.
Explains how to interpret diagnostic fault codes to identify instrument issues and faulty assemblies.
Provides information on ordering replacement electrical components, including necessary order details.
Lists all replaceable parts for the 5700A/5720A Series II calibrators with Fluke stock numbers.
Provides a schematic diagram of the Analog Motherboard PCA, detailing component locations and connections.
Provides a schematic diagram of the Digital Motherboard PCA, illustrating component layout and interconnections.
To Next Page
