Fluke 5700A Series User Manual

Introduction and Specifications
General Specifications 1
1-13
1-28. General Specifications
Warm-Up Time....................................................... Twice the time since last warmed up, to a maximum of 30 minutes.
System Installation ............................................... Rear output configuration and rack- mount kit available.
Standard Interfaces .............................................. IEEE-488, RS-232, 5725A, 5205A or 5215A, 5220A, phase lock in
(BNC), phase reference out (BNC).
Temperature Performance
Operating ............................................................ 0 °C to 50 °C
Calibration........................................................... 15 °C to 35 °C
Storage ............................................................... -40 °C to 75 °C
Relative Humidity
Operating ............................................................ <80 % to 30 °C, <70 % to 40 °C, <40 % to 50 °C
Storage ............................................................... <95 %, non-condensing. A power stabilization period of four days may
be required after extended storage at high temperature and humidity.
Safety ..................................................................... Designed to comply with UL3111; EN61010; CSA C22.2 No. 1010;
ANSI/ISA S82.01-1994
Guard Isolation...................................................... 20 V
EMI/RFI................................................................... Designed to comply with FCC Rules Part 15, Subpart B, Class B;
EN50081-1, EN50082-1
ElectroStatic Discharge........................................ This instrument meets criteria C for ESD requirements per EN61326
Line Power
Line Frequency .................................................. 47 to 63 Hz; ±10 % 100 V, 110 V, 115 V, 120 V, 200 V, 220 V, 230 V,
240 V
Maximum Power
5700A/5720A .................................................. 300 VA
5725A ............................................................. 750 VA
Weight
5700A/5720A ...................................................... 27kg (62 lbs)
5725A.................................................................. 32kg (70 lbs)
Size
5700A/5720A
Height ............................................................. 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet
Width............................................................... 43.2 cm (17 in), standard rack width
Depth .............................................................. 63.0 cm (24.8 in), overall; 57.8 cm (22.7 in), rack depth
5725A
Height ............................................................. 13.3 cm, (5.25 in)
Width and Depth ............................................. Same as 5700A/5720A. Both units project 5.1 cm, (2 in) from rack
front.

Fluke 5700A Series Specifications

General

Type	Multifunction Calibrator
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% non-condensing
Frequency Range	10 Hz to 1 MHz
Accuracy	Varies by function and range. See manufacturer's specifications for details.
Output Stability	Varies by function and range. See manufacturer's specifications for details.
Power Requirements	50 Hz to 60 Hz