Fluke 5700A Series User Manual

5700A/5720A Series II Calibrator
Service Manual
1-4
• A traceable calibration procedure for all modes and ranges that requires only 10V,
1Ω, and 10 kΩ external standards, with only occasional independent verification.
• Fast, simple, automated calibration check providing added confidence between
calibration recalls, and data that can be used to document and characterize the
calibrator’s performance between calibration recalls.
1-2. Contacting Fluke
To order accessories, receive operating assistance, or get the location of the nearest Fluke
distributor or Service Center, call:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at
www.fluke.com.
1-3. About this Manual
This manual provides complete information for installing the calibrator and operating it
from the front panel keys and in remote. It also provides a glossary of calibration-related
terms as well as general items such as specifications and error code information. The
following topics are covered in this manual:
• Installation
• Operating controls and features
• Front panel operation
• Remote operation (IEEE-488 bus or serial port remote control)
• Serial port operation (printing, displaying, or transferring data, and setting up for
serial port remote control)
• Operator maintenance, including how to calibrate the 5700A/5720A Series II
• Options and accessories
1-4. How to Use this Manual
Use the following list to find the location of specific information.
• Quick setup procedure: 5700A/5720A Series II Operators Reference Guide
• Unpacking and setup: Chapter 2.
• Installation and rack mounting: Chapter 2; also the rack mount kit instruction sheet
• AC line power and interface cabling: Chapter 2
• Controls, indicators, and displays: Chapter 3
• Front panel operation: Chapter 4
• Cabling to a UUT (Unit Under Test): Chapter 4
• Using auxiliary amplifiers: Chapter 4
• Self calibration: Chapters 1 and 7

Fluke 5700A Series Specifications

General

Type	Multifunction Calibrator
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% non-condensing
Frequency Range	10 Hz to 1 MHz
Accuracy	Varies by function and range. See manufacturer's specifications for details.
Output Stability	Varies by function and range. See manufacturer's specifications for details.
Power Requirements	50 Hz to 60 Hz