Fluke 5080A - Service Manual

March 2016
© 2016 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
5080A
Calibrator
Service Manual

Summary

Limited Warranty and Limitation of Liability

Operator Safety Summary

Specifications

General Specifications

Detailed Specifications: DC Voltage

Detailed specifications for DC voltage output ranges.

Detailed Specifications: DC Current

Detailed specifications for DC current output ranges.

Detailed Specifications: Resistance

Detailed specifications for resistance output ranges.

Detailed Specifications: AC Voltage

Detailed specifications for AC voltage output.

Detailed Specifications: AC Current

Detailed specifications for AC current output.

Theory of Operation

Performance Tests

Verification Procedures

Calibration Procedures

Mainframe Calibration

Step-by-step guide for calibrating the main unit.

SC200 Option Calibration

Procedures for calibrating the SC200 oscilloscope option.

MEGOHM Option Calibration

Remote Calibration Interface

Fluke 5080A Specifications

General

DC Voltage Range	0 to 1020 V
AC Voltage Range	0 to 1020 V
DC Current Range	0 to 20.5 A
Interface	RS-232, IEEE-488
Category	Calibrator
Outputs	Voltage, Current, Resistance
Resistance Range	0 to 100 MΩ
Frequency Range	10 Hz to 1 MHz
Power Supply	100 V to 240 V, 50 Hz to 60 Hz