Fluke 5080A - Parts

Calibrator
Replaceable Parts
99
Parts
Table 53 shows the replaceable parts for the Product. Figure 32 shows the parts
within the Product.
Table 53. Replaceable Parts
Reference
Designator
Description
Part
Number
Qty
A3 5080A-7603, MOTHER BOARD, A3 - TESTED 4018029 1
A5 5080A-7605, OHMS, A5 - TESTED 4018034 1
A6 5080A-7606, INGUARD/CPU, DDS, A6 - TESTED 4018041 1
A7 5080A-7607, CURRENT, A7 - TESTED 4018052 1
A8 5080A-7608, VOLTAGE, A8 - TESTED 4018065 1
A9 5080A-7609, OUT-GUARD, CPU, A9 - TESTED 4018076 1
A12 5080A-7612, POWER SUPPLY, A12 - TESTED 4018083 1
F1 FUSE, FUSE, .25X1.25,5A,250V,SLOW 109215 1
H1-16
HEX NUT, M3-0.5,2.4MM THICK,DIN 934,STEEL,Z
CL8,COARSE THREAD FINISHED
3472020 16
H17-H37
SCREW, HK M4-0.7X8MM,STEEL,PLAIN,LOW HEAD
SOCKET CAP SCREW,W/SELF LOCKING PATCH
3472154 20
H38-H60
SCREW,M3X0.5,6MM,PAN HEAD,PHILLIPS,STEEL,ZINC-
CHROMATE,S-L NYLON PATCH
3783203 22
H61-H77
WASHER,M3,6MM OD,3.38MM ID,0.4MM THK,DIN
6797,STEEL,ZINC,EXT TOOTH LOCK WASHER
3472012 16
H78,H79 WASHER, WASHER,FLAT,SS,.378,.563,.016 245811 2
H80-H83 INSULATOR,BNC BULKHEAD,POLYCARBONATE 3533990 4
H84,H85 WASHER,3 WAVE,SPRING,0.39 ID,0.50 OD,0.007 THICK 3591326 2
H86-H89
LOCK NUT,NYLON INSERT,M5-0.8,5MM THICK,DIN
985,STEEL,ZINC PLATED
3472047 4
H90-H93
SCREW,M5-0.8X80MM,8.8 DIN 931,COARSE PARTIAL
THD,STEEL,ZINC,HEX CAP SCREW
3471961 4
H94-H97
WASHER, FLAT,.219 ID,.506 OD,.061 THK,STEEL,ZINC-
CHROMATE
2565513 4
H98-H101 WASHER, WASHER,FLAT,STL,.160,.281,.010 111005 4
H102,H103
CONNECTOR ACCESSORY,D-SUB JACK SCREW,4-
40,.250 L,W/FLAT WASHER
1777348 2
H104,H105 SCREW,M3X0.5,6MM,FLAT,PHILLIPS,STEEL,ZINC-CLEAR 2064911 2
H106 WASHER, WASHER,LOCK,INTRNL,STL,.267ID 110817 1
H107 NUT, NUT, HEX, BR, 1/4-28 110619 1