5522A
Operators Manual
8-4
Table 8-1. Options and Accessories
Model Description
Y5537 24 in. (61 cm) Rack Mount Kit for 5522A
Y8021 Shielded IEEE-488 Cable 0.5 m (1.64 ft)
Y8022 Shielded IEEE-488 Cable 2 m (6.56 ft)
Y8023 Shielded IEEE-488 Cable 4 m (13 ft)
Rack Mount Kit
The Y5537 rack mount kit provides all the hardware necessary to mount the 5522A on
slides in a 24-inch (61 cm) equipment rack. Instructions are provided in the kit. (To rack
mount the 5725A Amplifier, order kit Y5735.)
IEEE-488 Interface Cable
Shielded IEEE-488 cables are available in three lengths (See Table 8-1). The cables
attach to the 5522A to any other IEEE-488 device. Each cable has double 24-pin
connectors at both ends to allow stacking. Metric threaded mounting screws are provided
with each connector. Appendix D shows the pinout for the IEEE-488 connector.
RS-232 Null-Modem Cables
The PM8914/001 and RS40 null modem cables connect the 5522A SERIAL 1 FROM
HOST port to a printer, video display terminal, computer, or other serial device
configured as DTE (Data Terminal Equipment). Appendix D shows the pinouts for the
serial connectors.
5520A-525A/LEADS
The optional test lead kit, 5520A-525A/LEADS, is a kit of test leads for voltage and
current, thermocouple extension wires, thermocouple miniconnectors, and thermocouple
measuring “beads.”
To Next Page
Loading...
