Fluke 568 - Accessories; Recommended Temperature Probes

56x
Users Manual
24
Accessories
Optional accessories for the thermometers are:
• Soft Carrying Case (H6)
• Calibration Certification
• All Type-K Temperature Probes with standard mini-connector. See Table 8
for more information.
Recommended Temperature Probes
See Table 8 for a list of recommended temperature probes.
Table 8. Recommended Temperature Probes
Probe Usage
80PK-1
The general purpose bead probe is an alternative, for quick, accurate surface
temperatures and air temperatures within ducts, vent temperatures.
80PK-8
Pipe clamp probes (2) are essential for tracking continuously changing
temperature differentials on hydronic tubing and pipe loops, and good for quick,
accurate refrigerant temperatures.
80PK-9
The insulation piercing probe provides a sharp tip to pierce pipe insulation and flat
probe tip for good surface thermal contact, air temperatures within ducts, and vent
temperatures.
80PK-11
Flexible Cuff Thermocouple Temperature Probe is a convenient way to attach a
thermocouple to a pipe while keeping hands free.
80PK-25
The piercing probe is the most versatile option. Good for checking air temperature
in ducts, surface temperature under carpets/pads, liquids, thermometer wells, vent
temperatures, and for penetrating pipe insulation.
80PK-26
The tapered probe is a good general-purpose gas and surface probe, with a good
length and low mass tip casing for faster reaction to surface and air temperatures.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com