Fluke 572 - Mode and Alarm Settings; Minimum-Maximum Value Display Mode; Setting the High Alarm Feature

15
572
Mode and Setup Alarm
The minimum and
maximum temperature
values during a
measurement session are
shown in the status bar at
the bottom of the display
(5), except when adjusting
the high alarm.
MODE
MIN-MAX VALUES
The high alarm feature
(HiAl) generates a visual
(A) and audible alarm if
the temperature is above
the setpoint.
T
o
ToT
set the
alarm value (which is in
the status bar (5), move
the “Setup” DIP switch
inside the unit’s handle to
ON. Press ENTER (D)
once, and use the up and
down keys (C) to adjust
the value.
SETUP
HIGH ALARM
5
5
A
A
C
D