Fluke 572 User Manual

16
572
Graphic Display and DIP Settings
D
3
Backlight: Backlight ON or OFF.
Set Default:
Activates the factory defaults.
Setup: Setup HiAlarm and Emissivity adjustment
activated.
Laserflash: The laser flashes when the alarm values
are surpassed.
Laser: activated (ON), not activated (OFF).
The graphic display (3)
shows the temperature as
a
moving bar graph. The
last ten measurements
are shown.
The minimum and
maximum temperature
scale of the graph is set
automatically by the unit
(Auto Range Feature).
Recall previous display
by pushing ENTER (D).
Change the settings in the
unit by using the DIP
switches located in the
battery compartment (see
BATTERIES section).
Lock:
T
rigger locked (ON)
or unlocked (OFF).
°
C/
°
F:
changes between
°C and °F.
Buzzer:Audible alarm ON
or OFF.
SETTINGS
SETTINGS

Fluke 572 Specifications

Temperature

temperature range	-30 to 900°C (-25 to 1600°F)
ambient operating range	0 to 50°C (32 to 122°F)
storage temperature	-20 to 50°C (-4 to 122°F)

Display

display resolution	0.1°C (0.2°F)
accuracy at 25°C	± 0.75% of reading or ± 1K (± 1.5°F)
repeatability	±0.5% of reading or ±1°C (±2°F)

Power

power	2 x 1.5 V Alkaline Type AA
battery life	13 hrs. (50% laser and 50% backlight used)
response time (95%)	250 mSec

Dimensions

dimensions	200 x 170 x 50 mm (7.9 x 6.7 x 2 inches)
tripod mount	1/4”-20 UNC
optical resolution (standard focus)	60 : 1 (19mm spot size at 1.15M)