Pressure Calibrator
Parts
11
Operating altitude: 3000 meters maximum
Relative humidity: 95 % up to 30 °C, 75 % up to 40 °C,
45 % up to 50 °C, and 35 % up to 55 °C
Vibration: Random 2 g, 5 Hz to 500 Hz
Shock: 1 meter drop test
Safety: Certified as compliant to CAN/CSA C22.2 No.
1010.2:1995. Complies with ANSI/ISA S82.01-1995.
Power requirements: Two 9 V batteries (ANSI/NEDA
1604A or IEC 6LR61)
Size: 60 mm H x 87 mm W x 210 mm L (2.38 in H x 3.41
in W x 8.28 in L); with holster: 66 mm H x 94 mm W x 216
mm L (2.61 in H x 3.72 in W x 8.5 in L)
Weight: 737 g (26 oz); with holster: 992 g (35 oz)
Parts
Replacement parts are listed in Table 5. These parts can
be ordered by contacting Fluke. Refer to the Users Manual
for a complete list of user-replaceable parts.
Table 5. Parts
Description PN/ Model Qty
Fuse,
125 mA, 250 V fast
W
To ensure
safety, use exact replacement only.
686527 1
9 V battery,
ANSI/NEDA 1604A or IEC 6LR61
614487 2
AC70A alligator clip, red
AC70A alligator clip, black
738047
738120
1
1
Holster, Yellow 664182 1
TL75 test lead set TL75 1
Pump assembly, 718 30G 691383 1
Pump assembly, 718 100G 691748 1
Pump seal kit 691805 Opt
718 Product Overview Manual 1549632 1
718 CD-ROM
(contains Users Manual)
1574463 1
71X Series Calibration Manual 686540 Opt
700-ILF In-Line Filter 700-ILF 1
To Next Page
Loading...
Need help?
General
