Fluke 718 1G - Maintenance; In Case of Difficulty; Cleaning; Calibration

718 Series
Users Manual
20
Maintenance
XWWarning
To avoid possible electric shock, personal
injury, or sudden release of pressure, review
“Safety Information” earlier in this manual
before proceeding.
Remove test leads before opening.
For maintenance procedures not described in this
instruction sheet, or if the Calibrator needs repair, contact
a Fluke Service Center.
In Case of Difficulty
• Check the battery, test leads, pressure module, and
pressure tubing. Follow replacement and connection
instructions properly.
• Review this instruction sheet to make sure you are
using the Calibrator correctly.
If the Calibrator needs repair, and the Calibrator is under
warranty, see the warranty statement for terms. If the
warranty has lapsed, the Calibrator can be repaired and
returned for a fixed fee.
Cleaning
Periodically wipe the case with a damp cloth and
detergent; do not use abrasives or solvents.
Calibration
Fluke recommends that you calibrate your Calibrator once
a year to ensure that it performs according to its
specifications. A calibration manual is available (PN
686540). Call 1-800-526-4731 from the U.S.A. and
Canada. In other countries, contact a Fluke Service
Center.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com