Fluke 77/BN - Page 7

| WARNING
TO AVOID ELECTRICAL SHOCK:
le USE CAUTION WHEN WORKING
'ABOVE 60V DC OR 25V AC RMS.
SUCH VOLTAGES POSE A SHOCK
HAZARD.
bi ENSURE THAT THE TEST LEADS
‚ARE IN GOOD CONDITION.
CAUTION
To avoid damage to the meter:
* Above 500V, disconnect the test
leads from the test points before
changing functions.
* Clean the case with a damp cloth
and mild detergent. Do notuse abra-
sives or solvents.
NOTE
* For correct readings in Q and rl)
ensure that the power is off in the
device being tested.
* Environments with rf noise or arcing
may cause improper display of sym-
bols; to reset the meter, momentarily
turn the rotary switch to OFF.