Fluke 77/BN - Page 6

CAUTION
* Always be careful when working
with voltages above 60V de or 25V
acrms.Such voltages pose a shock
hazard.
* Always keep your fingers behind
the finger guard on the probe when
making measurements.
* Always use a high voltage probeto
measure voltage ifthe peak voltage
might exceed 1000V.
* Toavoid accidentally applying volt-
age to the 10A terminal, verify that
the red test lead is connected to the
V input terminal before making a
voltage measurement.
* To avoid damage or injury, never
use the meter on unprotected cir-
cults that exceed 4800 volt-amps.
4
The following items are furnished with
your multimeter:
77/BN DMM (1)
Test Lead Set (1)
Operator Manual (2)
Holster (1)