Need help?Do you have a question about the Fluke 863 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| DC Voltage Range | 0.1 mV to 1000 V |
| Diode Test | Yes |
| Continuity Test | Yes |
| Display Hold | Yes |
| Min/Max Recording | Yes |
| Auto Ranging | Yes |
| Safety Rating | CAT III 1000 V, CAT IV 600 V |
| DC Current Range | 0.1μA to 10A |
| AC Current Range | 0.1μA to 10A |
| Temperature Range | -200 °C to +1350 °C (-328 °F to +2462 °F) |
| Battery Type | 9V |
| Battery Life | 400 hours |
| Dimensions | 89 x 49 mm |
| Measurement Functions | Voltage, Current, Resistance, Capacitance, Frequency, Temperature, Diode, Continuity |
Covers manual introduction, product description, and power requirements.
Details accessories, service info, and manual conventions.
Lists general specs and detailed electrical measurement accuracies.
Covers frequency, logic, component test, and trigger specifications.
Overviews chapter structure and basic operational sequences.
Details power sources, outputs, signals, and functional blocks.
Explains signal conditioning and processing for measurements.
Details triggering, component test, and digital circuitry.
Overview of maintenance, warranty, and static-safe handling.
Step-by-step instructions for maintenance tasks.
Guides for replacing internal fuses.
Overviews chapter, lists equipment, and describes setup.
Procedures for testing DC Volts, mV DC, and Diode Test.
Procedures for testing AC Volts, Ohms, Conductance, Capacitance.
Procedures for testing Frequency, Duty Cycle, Amps, Logic.
Procedures for Peak Hold, Component Test, Glitch Capture, External Trigger.
Steps for calibration setup and DC calibration.
Procedures for AC Volts, mAµA, Amps, Ohms/nS calibration.
Procedures for calibrating internal constants and LCD voltage.
Covers parts listing, how to obtain, and manual status.
Information on service centers and comprehensive part listings.
Details the main PCA schematic diagram.
To Next Page
