867B,863
Service Manual
1-6
Specifications 1-9.
General
Display: LCD - Dot Matrix, 240 X 200 pixels
Fluke 867B: Transmissive, Backlit
Fluke 863: Reflective
Temperature Operating: 0°C to 50°C (See Figure 1-1.)
Storage: -20°C to 60°C (Batteries Removed)
Charging: 0 to 45°C
Temperature Coefficient: (0.1 X % Accuracy) per °C (0°C to 18°C and 28°C to 59°C)
Relative Humidity: 0% to 90% non-condensing
Altitude Operating/Non-operating: 6,562 ft. (2,000 meters)/ 40,000 ft. (12,200 meters)
Input Impedance: 10 MΩ
Shock and Vibration: per MIL-T-28800, class 3, sinusoidal, non-operating
Dimensions: 5.4 x 9.7 x 2.7 in. (137 x 246 x 68 mm)
Weight: 3 lbs (1.35 kg)
Battery Operating Time (backlight off or low)
Alkaline: 8 hours typical
NiCd:
863: 10 hours typical
867B: 8 hours typical
Battery Recharge Time: 16 hours minimum from full discharge
Drip Proof Case: per IEC 529; IP 52, Drip Proof
Safety: Designed to meet IEC 1010-1 Category III, UL3111, CSA-C22.2. 1010-1-92, CE and TUV
requirements
Certification:
Electromagnetic Interference
RF Emissions EN-50081-1 Commercial Limits
VFG 243-1991
FCC Part 15 Class B,
RF Susceptibility: EN 50082-1 Industrial Limits
To Next Page
Loading...
