January 2020
© 2020 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies. 1
87V MAX
Digital Multimeter
Calibration Information
Introduction
XWWarning
To prevent electric shock or injury, do not perform the
performance tests or calibration adjustment procedures unless
qualified to do so.
The information provided in this document is for the use of
qualified personnel only.
This document provides adjustment and performance test procedures for the
Fluke 87V MAX Digital Multimeter (the Meter).
See the 87V MAX Users Manual for complete operating instructions.
Contact Information
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-921-0835
• Brazil: +55-11-3530-8901
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
Safety Information
General Safety Information is in the printed Safety Information document that
ships with the Product and at www.fluke.com. More specific safety information is
listed where applicable.
To Next Page
