Fluke 9040 User Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one year
from the date of purchase. This warranty does not cover fuses, disposable batteries,
or damage from accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to extend any other
warranty on Fluke’s behalf. To obtain service during the warranty period, contact your
nearest Fluke authorized service center to obtain return authorization information,
then send the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSE-
QUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.
Since some states or countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this limitation of liability may not
apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99

Fluke 9040 Specifications

Operating Environment

operating temperature range	0 °C to +40 °C
pollution degree	2
type of protection	IP 40

Power

fuse rating	500 mA / 1000 V
power supply	From unit under test
maximum operating voltage	690 V

Safety

electrical safety standard	IEC 61010-1/EN 61010
protection levels	CAT III/600 V to ground, CAT IV/300 V to ground
nominal voltage for rotary field direction	40 to 690 V ac

Weight and Dimensions

size	124 x 61 x 27 mm
weight	200 g
fuse size	6.3 x 32 mm