Fluke FEV300 - Introduction and Overview; Product Introduction; Symbols and Safety Icons; Product Disposal Guidelines

• Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
• Do not use a current measurement as an indication
that a circuit is safe to touch. A voltage measurement is
necessary to know if a circuit is hazardous.
• Remove the input signals before you clean the Product.
• Use only specied replacement parts.
• Have an approved technician repair the Product.
• Do not use cable assembly if there is damage. Examine
the cable assembly for damaged insulation, exposed
metal. Check cable assembly continuity.
• Measure a known voltage rst to make sure that the
Product operates correctly.
• Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
• Do not use the Product if it is altered or damaged.
• Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
• Do not use cable assembly if they are damaged. Examine
the cable assembly for damaged insulation and measure
a known voltage.
• Use only accessory supplied with the Product.
• Only connect the Product to the charging stations as
indicated in the Specication section.
• Use the Product within the operating range only. The
operating range is specied in the Specication section.