Fluke i1010 User Manual

I410/i1010
English
Panel 6
If the Current Clamp Does Not Work
Check Correct
Battery = OK? Refer to “Testing the Battery.”
Voltmeter connections? Red to + or V
Black to C
Voltmeter function/range? mV dc
mV ac (or V ac)
Storage
During longer periods of non-use (> 60 days), remove and
store the battery separately.
Cleaning
Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
Service and Parts
The Current Clamp should be serviced only by a qualified
service technician. For service information, contact your
nearest Fluke dealer or service center.
Symbols
,
May be used on HAZARDOUS LIVE conductors.
T
Equipment protected by double or reinforced insulation.
W
Risk of Danger. Important information. See Instruction
Sheet.
X
Risk of Electric Shock.
)
Complies with U.S. and Canadian standards: UL61010-1;
CAN/CSA C22.2 No. 61010-1 (2004) & No. 61010-2-032
(2004)
s
Inspected and licensed by TÜV Product Services.
;
N10140
Conforms to relevant Australian standards.
P
Conforms to IEC 61010-1 2nd Edition & IEC 61010-02-032
J
Earth ground
B
AC (Alternating Current)
F
DC (Direct Current)
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com

Fluke i1010 Specifications

General

Interface	Banana plugs
Cord length	1.6 m
Product color	Red, Yellow
DC voltage (max)	600 V
Measurement category supported	CAT III
Quantity per pack	1 pc(s)