Do not use the Product above its rated frequency.
Disable the Product if it is damaged.
The table below lists the symbols that can be used on the
Product or in this document.
Maintenance
Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents to clean the
clamp.
Open the jaws and wipe the magnetic pole pieces with a
lightly oiled cloth. Do not allow rust or corrosion to form on
the magnetic core ends.
Dispose of old devices in a professional and environmentally
sound manner:
Delete personal data on the Product before disposal.
Remove batteries that are not integrated into the
electrical system before disposal. Dispose of batteries
separately.
If this Product has an integral battery, put the entire
Product in the electrical waste.
Symbol Description
Consult user documentation.
WARNING. RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of
electric shock.
Application around and removal from
uninsulated hazardous live conductors is
permitted.
Double Insulated
Measurement Category III is applicable to test
and measuring circuits connected to the
distribution part of the building’s low-voltage
MAINS installation.
Measurement Category IV is applicable to test
and measuring circuits connected at the
source of the building’s low-voltage MAINS
installation.
Conforms to European Union directives.
This product complies with the WEEE
Directive and its marking requirements. The
affixed label indicates that you must not
discard this electrical/electronic product in
domestic household waste. Do not dispose of
this product as unsorted municipal waste. For
information about take-back and recycling
programs available in your country, see the
Fluke website.
To Next Page
Loading...
