Need help?Do you have a question about the Fluke Hydra Series II and is the answer not in the manual?
General| Brand | Fluke |
|---|---|
| Model | Hydra Series II |
| Category | Test Equipment |
| Language | English |
Details the various electrical and physical parameters the Data Bucket can measure.
Covers unpacking, inspecting, and connecting the instrument to a power source.
Information on input connections, shielded wiring, and crosstalk.
Details how to turn the instrument on and select channels.
Step-by-step guide for configuring channels for various measurements.
Covers setting scan interval, measurement rate, alarms, and Mx+B scaling.
Procedure for inserting, removing, and changing memory cards.
Procedure for formatting a memory card for use with the instrument.
How to set data destination and mode for saving scan results.
Covers storing, loading, and erasing instrument configuration files.
Covers opening and erasing measurement data files.
Details common configurations for connecting the instrument to a PC.
Setting RS-232 parameters like baud rate, parity, CTS, and echo.
Procedures for testing the RS-232 link using terminal emulation or BASIC.
Explains how the instrument processes commands and outputs.
Describes Instrument Event Register, Standard Event Status Register, and Status Byte Register.
Summary and reference for all computer interface commands.
Details common configurations for connecting the instrument to a printer.
Setting RS-232 parameters for printer communication.
Procedures for printing scan results, review array, and memory card directory.
How to print scan data, including destination and mode settings.
Details common configurations for connecting a modem to a PC.
Setting RS-232 parameters for modem communication.
Procedure for connecting the modem to the Data Bucket instrument.
Setting RS-232 parameters for modem link.
Steps to test the modem link and troubleshoot connection issues.
Information on self-test routines and interpreting error codes.
Procedures for verifying instrument accuracy and operation.
Steps to verify the accuracy of voltage and resistance measurements.
Procedure to test the accuracy of thermocouple temperature measurements.
Test procedure for four-terminal resistance measurements.
Accuracy test for thermocouple temperature measurements.
Tests for RTD temperature measurement accuracy using different sources.
Procedures to verify digital input and output functionality.
Test to verify the functionality of digital output lines.
Test to verify the functionality of digital input lines.
Information on instrument calibration procedures.
Guidance on instrument servicing and contacting support.
Contains detailed technical specifications for the instrument.
To Next Page
