Fluke Hydra Series II - Connecting the Modem to an Instrument

2635A
Users Manual
6-6
Connecting the Modem to an Instrument
Remove the cable from the PC and connect to the Data Bucket, as shown in Figure 6-3.
If a different cable is used, be sure it is a modem cable.
RS-232
(DB-9)
(MALE)
RS-232 PORT
(DB-25)
(FEMALE )
HYDRA
MODEM
HS AA CD OH RD TD TR MRHS AA CD OH RD TD TR MR
FLUKE RS41 CABLE
(OR EQUAL)
op61f.eps
Figure 6-3. Connecting the Modem to an Instrument