Fluke II Series - Rear Panel Interface Connectors; Phase Lock Input Connector; IEEE-488 and RS-232 C Ports

5.
USE STATIC
SHIELDING
CONTAINERS
FOR
HANDLING
AND TRANSPORT.
8.
WHEN
REMOVING
PLUG-IN ASSEMBLIES
HANDLE
ONLY BY
NON-CONDUCTIVE
EDGES AND
NEVER
TOUCH OPEN
EDGE
CONNECTOR
EXCEPT
AT STATIC-FREE
WORK
STATION.
PLACING
SHORTING
STRIPS
ON
EDGE CONNECTOR
HELPS
9. HANDLE
S.S.
DEVICES
ONLY AT A
STATIC-FREE
WORK
STATION.
10.
ONLY
ANTI-STATIC TYPE
SOLDER-
SUCKERS
SHOULD
BE USED.
1 1
. ONLY
GROUNDED-TIP
SOLDERING
IRONS
SHOULD
BE USED.
7. AVOID
PLASTIC,VINYL
AND
STYROFOAM®
IN
WORK
AREA.
PORTIONS
REPRINTED
WITH
PERMISSION
FROM TEKTRONIX
INC.
AND
GENERAL
DYNAMICS, POMONA
DIV.
®
Dow
Chemical
9/93