Fluke III Series User Manual

70/73 English Instruction Sheet
Page 7
Holster
The snap-on holster absorbs shocks and protects the meter and
comes with a Flex-Stand. To protect the front of the meter, put
the meter face down in the holster.
hr15f.eps
Maintenance
W Warning
To avoid electric shock, remove the test leads
before opening the case, and close the case before
using the meter. To prevent fire and possible arc-
flash, use fuses with ratings shown on the back of
the meter.
Caution
To avoid damaging meter components, lift up the
end of the battery as shown. To avoid
contamination or static damage, do not touch the
circuit board without proper static protection.

Fluke III Series Specifications

General

Model	Fluke III Series
Category	Multimeter
Display	LCD
Diode Test	Yes
DC Voltage Range	0.1 mV to 1000 V
AC Voltage Range	0.1 mV to 750 V
Continuity	Yes
Digits	3.5