Introduction
standard Parts
Electrical and
mechanical replacement
parts can be obtai-
ned through your local Philips or Fluke
organization
or
rep-
resentative. However, many of the
standard
components
can
be obtained
from
other local suppliers. Before purcha-
sing
or
ordering
replacements parts, check the parts
list
for value, tolerance, rating, and
description.
If
the value
of the
physical component differs from what is
described in the parts list, you should
always
replace the
part with the same value as originally
mounted.
Special
Parts
In
addition
to
standard electronic components, the
follo-
wing special components are used:
-
Components
that are manufactured
or
selected by
Philips
to meet specific performance
requirements.
-
Components that
are
important for the safety of
the
instrument.
Both type of
components
may be replaced only by
com-
ponents obtained
through your local
Philips or
Fluke or-
ganization.
NOTE:
Physical
size and shape
of a component
may affect
the
performance
of
the
instru-
ment,
particularly at
high frequencies.
Always
use direct
replacements unless it
is
known that a
substitute
will not
degrade
the performance
of
the
instrument.
The
abovementioned
parts
are ‘Recommended
Replace-
ment Parts’
and are marked
with an ‘R’ in the
column
of
the
parts list.
Componenets
marked with a ‘P’ in
the column are ‘Pro-
duction items’ not
kept in
replacement
parts stock. These
items can be
ordered,
but the
delivery
time is longer than
for normal
replacement parts.
7-2
Replacement
Parts, Introduction
To Next Page
