7
Specifications
Specifications
Temperature Operating: -10ºC to +50ºC
Storage: -20ºC to +50ºC
Altitude Operating: 4,000 m
Storage: 12,000 m
Emitter type LED: dual 850 nm/1300 nm
Central wavelength 850 nm: +30 nm
1300nm: ±20nm
Spectral width (FWHM) 850 nm: 50 nm (typical)
1300nm: 170nm (maximum)
Minimum output power 850/1300 nm: -20 dBm
Power output stability
1
±0.1 dB over 8 hours
Auto dual-wavelength
switching
Yes. Can be enabled or
disabled by the user.
Optical connector Fixed SC
FindFiber ID generation Yes. Fixed at ID 1.
Output modes CW (continuous wave), 2 kHz
modulated, auto-wavelength
Power requirement 2 AA alkaline batteries, NEDA
15A, IEC LR6
Battery life
2
40 hours (typical)
Automatic power-off 30 minutes (can be disabled by
the user)
Low battery warning Blinking LED
Size 5.6 in x 3.2 in x 1.6 in
(14.2 cm x 8.1 cm x 4.1 cm)
Weight 9.8 oz (278 g)
1. 23°C ±2°C, after 5 minutes of warm-up time.
2. In auto-wavelength mode. Battery life depends on the condition
and type of batteries used. Fluke Networks recommends alkaline
batteries.
To Next Page
Loading...
