Need help?Do you have a question about the Fluke SimpliFiber Pro and is the answer not in the manual?
General| Model | SimpliFiber Pro |
|---|---|
| Category | Test Equipment |
| Wavelengths | 850 nm, 1300 nm (MM); 1310 nm, 1550 nm (SM) |
| Accuracy | ±0.2 dB |
| Power Meter Accuracy | ±0.2 dB |
| Type | Optical Loss Test Set |
| Fiber Type | Multimode and Singlemode |
| Display | LCD |
| Humidity | 95 % RH (non-condensing) |
| Storage Temperature | -20°C to 60°C |
Details precautions to avoid eye damage from hazardous laser radiation.
Provides guidance to avoid damaging fiber connectors and ensure test accuracy.
Instructions for entering and navigating setup mode for the meter.
Instructions for configuring auto power-off settings for the SimpliFiber Pro source.
Step-by-step guide for cleaning bulkhead connectors on sources and patch panels.
Instructions for cleaning the connector on the SimpliFiber Pro meter.
Procedure for periodically cleaning fiber adapters.
Explains the 1 Jumper method for testing fiber links, including connections and connector adapters.
Technical specifications for the SimpliFiber Pro meter, including detector, wavelengths, and range.
Procedures for cleaning and inspecting fiber connector endfaces.
Procedure for testing fiber optic cords in both directions to measure loss.
To Next Page
