Fluke SimpliFiber Pro - Display Features Overview

SimpliFiber Pro Meter and Test Kits
Users Manual
10
Display Features
A
B
C
D
E
F
G
H
E
C
I
K
L
M
N
O
D
Q
RS
J
P
F
ffl01.eps
Figure 3. Display Features
A DE: Indicates that pressing R or S scrolls through
choices in the current mode.
B SAVE: Indicates that pressing R saves the power or loss
measurement.
C RECORD: Label for the record number. VIEW RECORD:
Indicates the meter is displaying saved measurements.
See page 31.
D REF (reference): Label for the reference level in loss
mode. dBm: Measurement unit for the reference level.
See page 25.
E N WCheckActive
™
: Indicators for CheckActive
mode. CheckActive
™
indicates the meter is testing for
fiber activity. See page 18.
F Numeric display with units for loss (dB) and power
measurements (mW, µW, dBm).
G Numeric display for the wavelength.
H FindFiber
™
: Indicates the meter is testing for a FindFiber
source. ID is the label for the source’s identification
number, which appears on the numeric display (
F). See
page 20.
I POWER: The meter is measuring power. See page 22.
J LOSS: The meter is measuring power loss. See page 28.